New regulator for the kegerator

So when the Dooge left he took with him the regulator I was using for my second CO2 tank for beer filtering. So a week or so after losing the regulator I figured it was time to get a new regulator. I have been meaning to get a double regulator to simplify my gas distribution anyways, so this was the perfect excuse. In hindsight I probably could have used a triple regulator because I like to have a third port to connect to for bottle filling from the keg. Instead I just pulled the gas splitter from the old regulator so that I have two ports from one of the regulators. Not ideal, but at least the gas distribution unit is gone which saves some space.

Disconnecting all of the old tubing and adapters took a while, but it's not too hard if you're careful not to damage the regulator parts. Unfortunately when I pulled the regulator out of the box, one of the pressure gauges was all bent up and didn't work properly. So I had to pull the one from the old regulator to get things working. I wrote to Midwest Supplies and hopefully they will do an exchange for the broken pressure gauge.

Before	After